X Cutting - Kala XY trimmer offers several cutting modes, easy to program from its touchscreen control panel. Horizontal or X cutting is done automatically, by reading cutting marks or at fixed programmed lengths. Cutting marks (single or double lines) can be generated with most RIP software available on the market. Exclusive stop mark: the machine will stop automatically upon reading a specific stop mark included in the print file. This mark can be generated in your rip or inserted manually. This allows manual reset the (Y) blade to the required position for the next print series on the same roll.
Self sharpening X cutting blade with a counter blade. Two (2) blades are available depending on material needed to be processed. Both blades are easy to change and maintain by the operator to decrease downtime.
Advanced cut mark detection sensor allowing for the most precise X cuts.
X blade cutting angle adjustment and correction of the X blade to match the exact cutting marks on the print.
The Kala XY Trimmer can be operated in 4 different work modes. 3 of the modes allow the trimmer to work with most RIP Software and cut marks. The other working mode is for trimming and cutting set point lengths of material.
Y Cutting - Vertical or (Y) cutting blades are positioned manually. The machine is delivered with three (3) Y blade holders – two (2) single blade and one (1) double blade. Additional single or double blade holders are available for purchase. Removal media guides to convey the cut sheets out of the machine are included. The Y blades are very easy and quick to change and maintain by the operator.
The Kala XY Trimmer features a user friendly touchscreen control panel, and automatic media correction via a sensor that detects the edge position of the media and a reel that automatically adjusts the placement of the roll. The Y cutting blades can easily be adjusted on the fly via push buttons to correct errors due to misalignment of the printed rolls.
Specifications | |
---|---|
Max thickness of material | 1 mm - 40 mil |
Max working width | 1650mm or 65" |
Max media weight | 50kg or 110 lbs. |
Max media diameter | 250mm or 10" |
Operating speed | up to 18m or 60 feet per minute |
Electrical requirements | 110v |
Accuracy cross cutting | +/- 1mm or .04" |
Adjustable speed | .3 to 6.2m/mm or .9 to 21 ft |
Cutting modes | Mark recognition, set length |
Electrical adjustments of set of Y blades on the fly | Yes |
Automatic alignment of media edge | Yes |
Dimensions | 103" x 33" x 48" |
Weight | 334kg or 736 Lbs. |
Shipping Dimensions | 108" x 40" x 60" |
Shipping Weight | 450kg or 992 Lbs. |
Warranty | One (1) Year Parts |
Certifications | CE and RoHS |
Software Support for Cutting Marks | SAI, Onyx, Caldera |