The InnoPrinter MK3 Roll-to-Roll Semi-Automatic Heat Press is the most popular model in the InnoPrinter MK range, and for good reason: it is the one press that handles both large garment graphics and small detailed work from a single machine. With a 13.8" x 9.4" (350 x 240mm) pressing area, the MK3 presses full-size front and back graphics, and with a reduced base plate or magnetic silicone pads it drops down to handle left-chest logos, sleeve prints, neck labels, and care labels, all from the same continuous roll-to-roll workflow that sets InnoPrinter apart from conventional clamshell, swing-away, and shuttle presses.

Where traditional presses force operators to cut, sort, and hand-position every transfer, the MK3 keeps your media loaded in roll format and presses it with consistent heat, pressure, and placement on every cycle. Engineered and made in Spain by InnoPrinter, a manufacturer with over twenty-five years of experience building industrial roll-format heat transfer systems, the MK3 is fully compatible with direct-to-film (DTF), sublimation, heat transfer vinyl (HTV), screen printed transfers, and HP Indigo transfers. It is available exclusively in North America through Supply55, Inc.

One Press for Large Graphics and Small Detailed Work

The MK3 is the model most shops choose because it doesn't lock you into a single job size. Its 13.8" x 9.4" platen is large enough for full garment graphics, back prints, and oversized logos, yet the same machine handles small detailed placements when you fit a reduced-size base plate or magnetic silicone pads to raise the garment to the correct height. That means one MK3 covers the full range of work a typical decorator runs, from a back print to a neck label, without buying a second press.

Consistent Heat, Pressure, and Placement at Roll-to-Roll Speed

The semi-automatic, foot-pedal cycle lets a single operator load the garment, tap the pedal, and let the machine hold the same temperature, pressure, and dwell time run after run. The transfer media stays loaded and positioned inside the press, so placement does not drift from the first garment to the last. At up to 720 prints per hour, the MK3 turns a faster line into a more consistent one, not a sloppier one.

Built-In Laser Alignment for Repeatable Placement

A built-in laser alignment system paired with a pneumatic media clamp lets operators hit accurate, repeatable placement quickly, on a full-size back print or a small neck label alike. The result is fewer rejects, less rework, and clean, centered placement on every press, whatever size you are running that shift.

Quiet, Efficient, Production-Ready

Low-energy heating elements hold stable temperatures while keeping power draw efficient, with the MK3 running on standard 220V single-phase power at 950W peak. At a quiet 44 dB and with skin detection safety controls, the MK3 is built to run all day in a busy production environment.

InnoPrinter MK3 Specifications

*Throughput figures are based on a left chest transfer time study. Actual impressions per hour will vary with transfer size, layout, and operator.

Complete the Workflow with the InnoSlitter

The MK3 is the press half of a continuous roll-to-roll workflow. Pair it with the InnoSlitter to convert wide printed DTF rolls into narrow, production-ready rolls sized to your garments and layouts at up to 40 feet per minute, far faster than cutting transfers by hand. The slitter feeds directly into MK3 press application, so your transfers stay in roll format from slitting through pressing. Available in 24" (60cm) and 36" (90cm) models with tool-free width adjustment and pneumatic blades that retract automatically when stopped. Together, the InnoSlitter and MK3 rebuild the labor-intensive back half of transfer production as a fast, continuous roll process.

Schedule a Demonstration

InnoPrinter roll-to-roll heat presses are available exclusively through Supply55, Inc. in North America, with pre- and post-sales support and service provided by Supply55. All InnoPrinter machines include English and Spanish language support. Call 734-668-0755 or email sales@supply55.com to schedule a live in-person demonstration at Supply55 or a virtual demonstration of the InnoPrinter MK3 roll-to-roll semi-automatic heat press.